Hi,
For regulatory issues our design requires a resistor and fuse to limit the amount of current that is able to be pulled from a small 6V SLA battery. This can't be changed.
What I would like to know is how to go about predicting how much current the LM2734X will pull from the battery in order to achieve a 3.3V output at different load currents.
My circuit has a 2.7R and 630mA fuse (approx. 0.3R) inbetween the battery and the LM2734X.
I would like to be able to know how to predict when the LM2734X will fall out of regulation if the load current is, for example 600mA.