Hi
I an trying to configure the TPS65930 PMIC for USB B device Connect and disconnect interrupt generation.
I configured following registers PWR_EDR1=0xBF,PWR_IMR1 = 0xF2,USB_INT_EN_RISE_SET =0x1F and USB_INT_EN_FALL_SET = 0x1F.Whenever I connect and disconnect USB cable with PC, USB OTG Functonlity is working but interrupt is not generating from PMIC TPS659XX on INT1 pin.
What all the registers required to program for USB connect and disconnect Interrupt Generation?
Regards
Raja